KNOW EXACTLY
WHAT YOUR
WARRANTY COVERS.

Warranty Scope

These Limited Product Warranty Terms apply to eligible VEHICOTEK film (Product). A Covered Product is eligible film identified by the applicable warranty record or certificate, or supported by reasonable proof of an eligible installation where registration is recommended rather than required. Coverage concerns qualifying manufacturing or material defects and is subject to the applicable conditions, limitations and exclusions, without limiting rights that cannot be excluded by law.

The Covered Vehicle is the vehicle on which the Product was originally installed. The Original Covered Owner is the owner identified for that original covered installation. A Warranty Certificate documents the approved Product, installation, coverage and ownership record; an Approved Warranty Claim is a claim confirmed to meet the applicable coverage requirements. An Authorized Dealer is an installer authorized by VEHICOTEK; a Participating Dealer is a dealer participating in the particular written warranty program. Dealer authorization alone does not establish participation in every program.

Available for eligible Product Warranty installations in the United States and Canada, subject to the applicable terms. This territory applies to Product Warranty only and does not establish geographic eligibility for the separate VEHICOTEK Shield Protocol. Mandatory consumer rights remain unaffected.

Warrantor

Warrantor: VEHICOTEK INC. Mailing address: 8133 Leesburg Pike, Suite 308, Vienna, VA 22182.

Coverage Overview

Eligible KEVY PPF carries a standard 10-Year Limited Product Warranty; Conditional Lifetime coverage is available only under the applicable documented participating-dealer program. RAYNARY 3, RAYNARY 5+ and RAYNARY 7 receive Conditional Lifetime Limited Warranty coverage for qualifying manufacturing defects and qualifying color fading under the applicable terms. KEVYhorizon has a 30-Day Limited Manufacturing Defect Warranty.

Duration and eligibility depend on the installed Product, original installation date, covered ownership and any applicable written program conditions. Product Warranty and VEHICOTEK Shield Protocol are separate programs; an accidental-damage benefit does not expand this manufacturing-defect warranty.

Manufacturing Defect

A Manufacturing Defect is a verified failure of the Covered Product attributable to a defect in its materials or manufacture. Visible staining, etching, bubbling, peeling, discoloration, deterioration, coating damage or another abnormal condition does not by itself establish a Manufacturing Defect.

VEHICOTEK may reasonably conduct a technical review of Product and installation evidence to distinguish materials or manufacturing failure from workmanship, environmental exposure, contamination, improper care, chemical exposure, abrasion, vehicle or substrate condition, ordinary wear or another external cause. Investigating an unusual or premature condition does not itself constitute acceptance of warranty liability. A determination will be based on reasonably available evidence and the applicable written terms.

KEVY Eligible Products

KEVYshield, KEVYshield+, KEVYmatte and KEVYsatin are eligible KEVY Paint Protection Films when identified in the applicable warranty documentation. Other KEVY PPF is eligible only when expressly designated by VEHICOTEK. KEVYhorizon is governed separately by Sections 17–20.

10-Year Warranty

Eligible KEVY Paint Protection Film receives a 10-Year Limited Product Warranty from the original installation date against qualifying manufacturing defects.

Conditional Lifetime Warranty

Conditional Lifetime Limited Product Warranty coverage applies only when expressly offered, issued and documented through a qualifying participating dealer program. Lifetime means the period during which the Original Covered Owner and, after one approved transfer, the First Approved Transferee owns the same covered vehicle.

PPF Warranty Transfer

An eligible KEVY PPF warranty may be transferred once to the next owner of the same Covered Vehicle, subject to eligibility verification and approval through the existing transfer process. Transfer requests should be submitted within 90 days after transfer of vehicle ownership. Submission alone does not approve a transfer.

The standard 10-Year warranty transfers only its remaining original period. For documented Conditional Lifetime coverage, the First Approved Transferee is covered while owning the same Covered Vehicle under that program. No second transfer is permitted; replacement does not create another transfer right.

KEVY PPF Covered Conditions

Potentially covered conditions, when caused by a verified Manufacturing Defect, include adhesive-system failure, delamination, abnormal bubbling or blistering, peeling caused by Product failure, abnormal cracking attributable to the film, or failure of a covered film layer or coating. Top-coat failure caused by a verified manufacturing or material defect may qualify for coverage.

Hydrophobic, self-healing, stain resistant, contamination resistant, chemical resistant, scratch resistant, UV resistant and similar descriptions refer to performance characteristics under appropriate normal use conditions. They do not mean the Product is stain-proof, etch-proof, scratch-proof, chemical-proof, damage-proof or immune from all environmental and physical exposure.

KEVY PPF Exclusions

Damage caused or materially contributed to by scratches, cuts, accidental physical damage, rock chips, road debris, collision, vandalism, installation workmanship, paint or substrate failure, improper maintenance, chemical exposure, environmental contamination, improper third-party service or ordinary wear is not a covered Manufacturing Defect.

External contaminants include, without limitation, bird droppings, tree sap, berries, fruit residue, insects, pollen, road tar, road chemicals, industrial fallout, acid rain, hard-water or mineral deposits, organic matter, fuel, oil, solvents, cleaning chemicals, detailing products and other external substances. Resulting staining, discoloration, chemical etching, spotting, loss of gloss, top-coat degradation, surface deterioration, residue or similar cosmetic or functional deterioration is not automatically a Manufacturing Defect merely because it appears on the Product.

Top-coat staining, etching, degradation or deterioration caused or materially contributed to by environmental exposure, contamination, chemicals, improper maintenance, abrasion or other external causes is excluded. This does not exclude top-coat failure attributable to a verified Manufacturing Defect.

Proper care and maintenance help preserve appearance and performance. VEHICOTEK Film Care & Maintenance Instructions, when made available for the applicable Product, provide care guidance. Failure to follow a recommendation does not automatically void the entire warranty. Damage caused or materially contributed to by neglect, delayed contaminant removal, incompatible chemicals, aggressive cleaners, abrasive correction, improper washing or detailing, or other unreasonable care is excluded; unrelated otherwise covered defects remain eligible.

RAYNARY Covered Products

RAYNARY 3, RAYNARY 5+ and RAYNARY 7 are eligible automotive window-film products under their applicable Conditional Lifetime Limited Product Warranty and warranty documentation. Manufacturing-defect coverage, owner eligibility, exclusions and claim procedures apply to all three; qualifying color fading is addressed separately in Section 14.

Conditional Lifetime Definition

RAYNARY 3, RAYNARY 5+ and RAYNARY 7 Conditional Lifetime coverage for qualifying manufacturing defects and qualifying color fading applies to the Original Covered Owner while the Covered Product remains installed on the same Covered Vehicle, unless an applicable written warranty certificate expressly provides otherwise. Lifetime describes that covered ownership period, not the life of every subsequent owner or a guarantee against normal aging. No transfer right is created for RAYNARY by the KEVY PPF transfer provision.

RAYNARY Covered Conditions

RAYNARY 3, RAYNARY 5+ and RAYNARY 7 coverage applies to verified manufacturing or material defects affecting the physical integrity of the film, including qualifying adhesive failure, bubbling, peeling or delamination attributable to the Product rather than workmanship or an excluded cause. All three series also receive qualifying color-fading coverage as defined in Section 14 under the applicable terms.

Qualifying Color Fading Coverage

RAYNARY 3, RAYNARY 5+ and RAYNARY 7 Conditional Lifetime Limited Warranty includes the same qualifying color-fading coverage framework: abnormal or premature loss of the Product's intended color performance attributable to a verified manufacturing or material defect and confirmed through the claim process.

Ordinary aging, environmental contamination, chemical exposure, glass-related visual differences, improper care, installation differences and other excluded causes do not automatically constitute qualifying fading. Color shift, shade change, gradual discoloration and changes in hue or darkness are not independently covered appearance changes unless expressly covered by the applicable warranty. A verified qualifying fading defect is not excluded merely because it also changes the appearance of the film.

Window Film Exclusions

RAYNARY damage caused or materially contributed to by razor blades, scrapers, sharp tools, abrasive cleaning materials, incompatible cleaners or chemicals, physical scratching, window-regulator or weatherstrip contact, aftermarket accessories, vehicle-glass defects or cracking, defroster-grid or antenna-related conditions, unauthorized alteration, workmanship, misuse, improper care or ordinary wear is excluded. Damage to vehicle glass, defroster grids or antennas is not itself a Manufacturing Defect in the film.

Proper Product-specific care is required to preserve appearance and performance. Failure to follow a care recommendation does not automatically void otherwise valid coverage; only damage caused or materially contributed to by improper washing, cleaning, detailing, incompatible chemicals, abrasion, neglect or other unreasonable care is excluded. Performance descriptions express characteristics under appropriate normal use, not immunity from chemicals, scratches, UV exposure or all damage.

Window Tint Legal Compliance

Vehicle owners and installers remain responsible for compliance with applicable window-film, visibility and vehicle-use laws. Warranty coverage does not authorize an unlawful installation or use. Changes in tint laws, inspection rules, vehicle regulations or local legal requirements are not Product defects and do not, by themselves, create manufacturer warranty liability.

KEVYhorizon Warranty Period

KEVYhorizon Windshield Protection Film receives a 30-Day Limited Manufacturing Defect Warranty beginning on the original installation date. It is a sacrificial exterior windshield protection film; this short-term warranty does not provide impact or wear coverage.

KEVYhorizon Covered Manufacturing Failures

Potentially covered manufacturing failures include adhesion failure, peeling, bubbling, blistering, delamination and other verified manufacturing defects.

Wear and Tear Exclusion

Damage caused or materially contributed to by rock impact, road debris or abrasion, worn or contaminated wiper blades, repeated dry wiping, wipers operating across sand, dirt or debris, ice scrapers, snow-removal tools, sharp objects, abrasive compounds, incompatible cleaners, scratching, ordinary wiper wear or common-use deterioration is not a Manufacturing Defect.

Appropriate care of the film and wiper blades helps preserve performance. A missed care recommendation does not automatically void the entire warranty; damage caused or materially contributed to by improper care or an external cause is excluded. Sacrificial wear does not expand the 30-Day manufacturing-defect warranty.

Windshield Protection Limitation

KEVYhorizon is a sacrificial protective film. It does not guarantee that the underlying windshield will never chip, crack, break, pit, scratch or sustain other damage.

Installation Workmanship

Installation workmanship is not a manufacturing defect in VEHICOTEK film. Any installer workmanship obligation is separate from the VEHICOTEK manufacturer warranty unless expressly included in an approved written warranty.

Warranty Remedy

For an Approved Warranty Claim, the normal manufacturer remedy is replacement film material of the same Product or a reasonably comparable current VEHICOTEK Product, limited to the Product area or areas determined to contain a covered defect. For example, a hood-film defect normally calls for the affected hood film, a door-film defect for the affected door film, and a windshield-film defect for the affected covered Product.

A defect in one area does not establish that all film on the vehicle is defective. Unaffected areas or whole-vehicle film are not replaced solely to match aged film, gloss, color or appearance. If multiple areas are confirmed to share a covered manufacturing defect, VEHICOTEK may authorize a broader remedy. This remedy remains subject to any additional remedy required by applicable law.

Labor, Removal and Reinstallation

Labor is not automatically included. Unless expressly included by the applicable warranty certificate or participating-dealer warranty, removal, installation, disassembly, reassembly, transportation and other service costs remain separate.

Conditional Lifetime Dealer Participation

Conditional Lifetime coverage must be expressly offered, issued and documented under the applicable qualifying participating-dealer program. Installation alone or a dealer's oral statement does not establish this coverage. The applicable VEHICOTEK-issued warranty certificate or approved warranty record must confirm the covered Product, vehicle, owner and Conditional Lifetime entitlement; required program registration and record verification must be completed where specified by that program. No additional registration deadline or dealer condition is created by these terms.

Warranty Claim Procedure

Submit a claim through the VEHICOTEK warranty support process with a description of the condition. VEHICOTEK may reasonably request photographs, videos, invoice or proof of installation, registration information, Warranty ID, Product SKU, Product / Roll / LOT identification, installation date, affected-panel information, date first observed, exposure or contamination history, cleaning and detailing products used, correction procedures attempted, maintenance history, installer information and representative film samples where reasonably necessary. Provide available information; a missing identifier or sample is not, by itself, an automatic denial.

Where inspection is reasonably required, allow VEHICOTEK a reasonable opportunity to inspect before removal or alteration. If removal is necessary before review is complete, document the condition and preserve representative affected-film samples when reasonably practicable. Reasonable steps necessary for safety or to prevent further damage should be documented and communicated promptly.

If removal, destruction, disposal, aggressive chemical treatment, sanding, polishing, alteration or loss of affected film materially prevents a reasonable determination of cause, VEHICOTEK may deny coverage only to the extent that this loss of evidence materially prevents that determination. Evidence reasonably available from other sources will be considered. Technical review and a request for information do not themselves approve or deny a claim.

Warranty Registration

Registration is strongly recommended for the standard KEVY 10-Year and KEVYhorizon 30-Day Product warranties; failure to register does not by itself cancel otherwise valid standard coverage supported by reasonable proof of installation. Retain the invoice, Product identification and original installation date.

Conditional Lifetime entitlement must be expressly issued and documented under the applicable program as described in Section 24. An authoritative Warranty ID, certificate and status come from the approved VEHICOTEK warranty record. Registration or a lookup result does not by itself prove a Manufacturing Defect or approve a claim, and does not expand the coverage actually issued.

Third-Party Service

Third-party service does not automatically cancel otherwise valid coverage. Damage caused or materially contributed to by improper third-party installation, removal, maintenance, repair, modification or service is excluded; unrelated covered defects remain eligible.

Vehicle Accident / Repair / Repainting

VEHICOTEK warrants eligible film, not the condition or integrity of OEM paint, repainted, repaired or aftermarket paint, body filler, clear coat, wrap material, ceramic coatings, glass, trim or another underlying vehicle substrate. Substrate damage or failure is not itself a Product defect.

Paint lifting, clear-coat separation, weak repaint adhesion or substrate damage during installation or removal is not automatically a Manufacturing Defect in the film. Use on a repainted vehicle is not categorically prohibited by these terms; suitability and substrate condition must be assessed separately. Damage caused or materially contributed to by collision, vandalism, repainting, body repair or underlying substrate failure is excluded. A verified Product defect does not by itself establish responsibility for unrelated vehicle damage; mandatory legal rights remain unaffected.

Total Loss / Vehicle Disposal

Coverage is attached to the same covered vehicle and cannot continue after that vehicle is disposed of, declared a total loss, or otherwise leaves the covered ownership sequence.

Replacement Appearance

New replacement film may differ from aged film in gloss, color, shade or appearance. Such differences do not by themselves require replacement of unaffected panels or the whole vehicle. Broader replacement may be authorized where additional areas are confirmed to contain the same covered defect.

Replacement Warranty Period

Warranty repair or replacement does not restart the original warranty period or create another transfer right unless VEHICOTEK expressly states otherwise in writing. Replacement film receives only the remaining period and covered ownership entitlement applicable to the original installation.

Product-Line Changes

If the original product is discontinued, changed or unavailable, VEHICOTEK may provide a reasonably comparable current VEHICOTEK replacement product.

Dealer Representations

A dealer or installer may not expand, alter or replace these manufacturer terms unless VEHICOTEK has expressly authorized the written warranty or participating-dealer program.

Incidental and Consequential Damages

To the extent permitted by applicable law, VEHICOTEK is not liable under this Limited Product Warranty for incidental or consequential losses arising from Product failure, such as loss of vehicle use, lost income or other indirect loss. This limitation does not exclude liability or remedies that applicable law does not permit to be excluded. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.

Implied Warranties

This written warranty does not disclaim implied warranties of merchantability or fitness for a particular purpose that apply under law. Their availability, duration and remedies are governed by applicable law; these terms do not create an additional implied-warranty duration limit. Nothing in these terms reduces a non-excludable consumer protection.

Other Legal Rights

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, province to province or territory to territory. Nothing in this Limited Product Warranty waives or limits non-waivable consumer rights or remedies under applicable U.S. federal or state law or Canadian provincial or territorial law. A limitation or exclusion that applicable law does not permit will not apply to you to that extent.

Claim Disagreements

Claims and disputes will be handled in accordance with applicable law.

Separate VEHICOTEK Shield Protocol

VEHICOTEK Shield Protocol is a separate 12-month ownership benefit for qualifying accidental PPF damage on eligible full-body KEVY PPF installations. It is not part of this Product Warranty and has separate eligibility, claim and coverage rules.

Applicable Warranty Version

The warranty version identified on the applicable certificate or approved record controls. Warranty Version: 2.0. Effective Date: October 5, 2026. This publication does not retrospectively rewrite issued warranty records.

Severability

If a provision is held invalid or unenforceable, it will apply only to the extent permitted by applicable law, and the remaining provisions will continue to apply to the extent lawful. Severability does not remove mandatory consumer rights or make an otherwise unlawful limitation enforceable.

Contact VEHICOTEK

The warrantor is VEHICOTEK INC. Mailing address: 8133 Leesburg Pike, Suite 308, Vienna, VA 22182. For warranty assistance, claim submission or review, use the Contact VEHICOTEK page at /contact or email contact@vehicotek.com. Support can explain the appropriate secure process; do not send a warranty PIN, full VIN or sensitive personal evidence through general contact channels. Contacting support does not by itself create registration, claim approval or coverage.